Having a washing machine in your house helps you to wash your clothes quickly while you are busy on other household chores. This appliance saves you from the traditional way of washing and drying your clothes. But, with the passage of time and usage, failure in some of its operations are common. So, in this post, we will try to describe common problems that arise during the operation of machines.
1. Problems with the discharge of water:- If the washing machine stops in the process of washing with water, then most likely there is a blockage of the drain system or a drain pump has failed. First, you need to check the pump filter, if it is clogged then drain after cleaning the machine.
2. Problems with Heating:- If the machine stops heating water then the laundry will be poorly washed and a rotten smell will appear. This happens due to the faulty heating element of the washing machine. It needs to be replaced, so call your nearby best Ge washing machine repair company only.
3. Problems with the rotation of the drum:- The drum of the washing machine stops spinning and you will see there is a set of water in the tank draining but rotation does not occur. There could be several reasons associated: broken drive belt or flown off, faulty heating element or faulty electric motor. Replacing the part will help you to quickly solve the issue. Malfunction of the engine is mainly in worn brushes. Therefore, after proper replacement of the brushes, the engine continues to serve for a long time.
4. Problems with the flow of water:- If at the beginning of the washing machine, you found all the indicators are lit, but the water does not flow into the washing machine. At the same time, there is either a quiet hum or nothing happens at all. In this case, the main cause is in the intake valve which is either out of order or clogged. First, you need to check whether the water supply valve to the washing machine is open. If water enters, but the bay does not, then unscrew the inlet hose and check the condition of the valve grid, it may be blocked.
5. Problems with Extraneous Noise:- If during spinning, there is extraneous noise, gnash, vibration, whistle, and so on means, there is wear of the bearings. And they demand replacement. On the other side, it is worthwhile to list the wear of the shock absorbers, some foreign object in object between the tank and the drum, the imbalance of the laundry due to improper loading, improper installation on the floor, loosening of the attachment of counterweights, and unmounted transport bolts. It will help you to solve the issue immediately.
6. Problems with water leakage:- During or during the washing process, a puddle of water appears under the washing machine. Every connection that comes into contact with water in a washing machine can probably leak. Sometimes it can be very difficult to identify a leak, but most often it flows from the detergent dispenser bin. These bunkers are made up of two halves, in which water sometimes leaks. The reason can also be the strong water pressure in the water supply system. You can try to reduce the pressure by using a water supply tap.
7. Problems with the hatch door:- After washing the door of the hatch does not open, it is impossible to pull out wet linen. Here the device is blocking the hatch which does not allow to open the door during washing. In some cases, the door cannot be opened due to a broken handle. In both cases, after replacing the failed elements, the machine continues to work for many years.
8. Problems with the inclusion:- After pressing the “Start” button, nothing happens, or the indicators start flashing after connecting to the network. There are several reasons. First of all, check the outlet, maybe there is no electricity in it or it has weakened and there is no contact with the plug. Other reasons are a faulty power button, noise filter, thermo-blocking of the hatch, control unit, electronic module.
9. Electricity problems (knocks out traffic jams):- When the washing machine is turned on or during operation, the circuit breaker breaks. This is due to a short circuit. If the machine is triggered when turned on, it is usually faulty: noise filter (FPS), power button, wiped wires. If the machine knocks out in the process of washing, then the cause may be a heating element, an electric motor, wires.
The washing machine is one of the costly home appliances. Always using self-repairing techniques without adequate knowledge can cost you more. Therefore, it is advisable to call Washing Machine Repair company for regular service or in case of major faults. This will cost you less and benefit you more.
APlus Repair 